|
 |
|
For Fine Furniture and General Use.
2" and 2- 1/2" Wheel Diameters. Casters feature designer styling
for office or industry. Engineered and tested to exceed the
standards set for commercial and industrial use. Top portions are
available for attachment to all types of metal or wood furniture.
These casters are of the highest quality construction, which insures you
a smooth, trouble free operation.
Non- marking black rubber wheels feature
a self- lubricating bushing for extended wear and quiet operation. |
|
| |
|
 |
All Popular Sizes in Stock!
Available with al l popular top portions, with or without brake.
|
|
Wheel
Diameter |
5" |
5" |
4" |
4" |
3" |
23" |
|
Tread Width |
1- 1/4" |
15/16" |
1- 1/4" |
15/16" |
1- 1/4" |
15/16" |
|
| |
|
All
Popular Portions! |
|
|
|
Price: for
Two: $8.48 each Brake |
| |
|
2" Wheel
Diameter |
|
2 Wheel X 15/16"
Tread Width
75lbs. Working Load Capacity
Mounting Height: Top Plate=2- 5/8", Other Stems=29/16"
Finish: High Quality Nickel plating |
Brakes:
"-BR" to the end of part number. Add $0.95 each
2- 1/2 Wheel Diameter also available; please inquire |
|
|
|
 |
|
All Casters
are available with Brakes:
To Order with a side brake:
Add "-BR" to the end of above part numbers
Add 0.95 to the above prices.
Example = C-20TP-BR |
|
|
|
|
| |
Above shows standard horn with brake
|
3" Wheel
Diameter x 15/16" Tread Width
100 lbs. Working Load Capacity
Mounting Height: Top Plate=3- 5/8", Other Stems=3- 9/16"
Finish: High Quality Nickel Plating.
Brakes: Add "-BR to the end of part number. Add $2.66 each |
|
|
|
|
|
Above shown
standard horn with brake |
*above shows rigid
horn
|
|
3" Wheel Diameter x 1- 1/4" Tread Width
175 lbs. Working Load Capacity
Mounting Height: Top Plate = 3- 3/4", Other Stems = 3-
9/16"
Finish: High Quality Zinc Plating
Brakes: Add "- BR" to the end of part number. Add $2.66
each |
|
|
|
|
|
|
Heavy Duty
Casters |
|
These casters are ready for the big loads!
Put them on your heavy duty material handling equipment and say good- bye
to caster problems. They have 1quality features throughout.
Select the type of wheel that best suits your weight and use requirements,
then choose the size of caster you need. |
|
Roller Bearings for Smooth
Movement, Quality Welds for Strength, Zirk Fittings Allow
Lubrication/Maintenance! |
|
| |
|
"RCI"
Rubber/Cast Iron
The most popular for general purpose use. Rubber tread adds
cushion as caster moves
|
"PCI"
Polyurethane/Cast Iron
Polyurethane tire gives the ultimate wear resistance. Use where
you have heavy use and need a long wheel life.
|
"STL"
All steel wheel allows caster to operate under tremendous loads and in
dirty floor areas where debris would damage other types of wheels. |
|
|
|
|
4 Inch Wheel |
5 Inch Wheel |
6 Inch Wheel |
8 Inch Wheel |
|
| |
Plate Dimensions:
Overall: 4" x 1/2"
Hole Spacing (slotted):
From: 2- 5/8" x 3- 5/8"
To 3" x 3" |
Overall Heights:
Caster: 4' x 2", 5" x 2",
6" x 2', 8' x 2"
Height: 5- 5/8", 6- 1/2", 7
- 3/8', 9- 1/2" |
To Add Brake:
Add "- BR to the end of above part numbers
Add $4.24 each brake |
|
| |
|
|
| |
|
Scaffold
Caster, Rubber/cast Iron, 6" x 2" Wheel Diameter |
|
Used for floodlight stands, motion picture
equipment and other movable platforms that need to roll and stay put.
Dual- Unison locking system engages both wheel brake and swivel brake lock
simultaneously, and is hand or foot operated. When fully locked will
not disengage. Thread guards standard: Helps keep dirt, dust,
and other caster- hazardous materials that affect the wheel bearing.
Zerk fittings provided in the axle and swivel for lubrication.
|
|
|
