Solid Mat Overlays
Solid Mat Overlays Covers standard grid shelf to create a solid shelf.
Requires standard MetroMax iQ shelf.
Enclosure Panels
An efficient way to
enclose MetroMax iQ shelving for stationary or mobile applications.
Gray epoxy finish. See below for required mounting kit.
All panels are 7/8" (22mm) deep.
Ordering Guide for MetroMax iQ® Enclosure Panels
Ends — Panels required for each end, as
follows:
Nominal Post Height
18"
(457mm) Nominal Shelf Width
21"
(530mm) Nominal Shelf Width
24"
(610mm) Nominal Shelf Width
in
mm
54
1370
MEP35E
MEP35E
MEP55E
63
1600
MEP36E
MEP36E
MEP35E
74
1880
MEP37E
MEP37E
MEP35E
Backs- require multiple panels as follows
Nominal Post
Height
30"
(457mm) Nominal Shelf Width
36"
(914mm) Nominal Shelf Width
42" (1066mm)
Nominal Shelf Width
48" (1219mm)
Nominal Shelf Width
54" (1370mm)
Nominal Shelf Width
60" (914mm)
Nominal Shelf Width
72" (914mm)
Nominal Shelf Width
in
mm
54
1370
(2)MEP35E
(1)MEP35E (1)MEP55E
(2)MEP55E
(2)MEP35E (1)MEP55E
(1)MEP35E (2)MEP55E
(3)MEP55E
(1)MEP35E (3)MEP55E
63
1600
(2)MEP36E
(1)MEP36E (1)MEP56E
(2)MEP56E
(2)MEP36E (1)MEP56E
(1)MEP36E (2)MEP56E
(3)MEP56E
(1)MEP36E (3)MEP56E
74
1880
(2)MEP37E
(1)MEP37E (1)MEP57E
(2)MEP57E
(2)MEP37E (1)MEP57E
(1)MEP37E (2)MEP57E
(3)MEP37E
(1)MEP37E (3)MEP57E
Shelf-to-Shelf Dividers • Create full height compartments to fully organize the storage cube
between two shelves.
• Can be used as a side ledge or interior divider.
• Compatible with any MetroMax i™ or MetroMax Q open grid shelf or
Metro wire shelf.
• Consists of a divider assembly and (4) mounting clips.
Divider assembly: high density polypropylene 4" (102mm) panels
and stainless steel rods.
Mounting clips: high density polyethylene (HDPE)
MetroMax iQ® Dunnage Shelves
Provides additional
weight capacity (1,300 lbs. [590kg]) at bottom shelf location. Gray epoxy finish.
Adjustable Slides • Slides can be adjusted left to right to accommodate a variety of
pan, tray and container sizes.
• Corrosion-resistant taupe epoxy finish.
Super Slide System • Easily attaches to the shelf frame (under the mats) and is sized to
hold 3", 5", 6", and 8" (76, 127, 152, 203mm) tall tote boxes.
• Corrosion-resistant taupe epoxy finish.
Outside
Slide Dim: 10-1/4x20 x3/8x21- 5/8 in Fits Shelf: 24 in. Adaptable Boxes: TB93000Series (sold separately) Part # MQSS2E Price. $ 77.70
Shelf Dividers
8" (203mm) Shelf Dividers — standard duty • Use to create organized compartments or to simply separate shelf contents. • Easily repositioned on grid and solid shelves. • Corrosion proof: Polymer (High-Density Polypropylene). • Three-piece design — Ships assembled.
8" (203mm) Universal Shelf Dividers — light duty, for open grid shelves
• Maximum flexibility: Can be repositioned along the entire shelf. • Easiest divider to install. • Three-piece design; clips connect to any open grid or wire shelf; divider panel then drops into place. Does not attach to solid shelves. • Corrosion proof: Polymer (High-Density Polypropylene)
Length
Price Each
Qty
in
Part #
18
MQD18-8
$ 17.50
24
MQD24-8
19.50
Length
Price Each
Qty
in
Part #
18
MUD18-8
$ 17.50
24
MUD24-8
19.5 0
Shelf Ledges
2" (51mm) Stackable Shelf Ledges • Prevent items from falling off shelves. • Snap on and off quickly. Easily stacked to contain larger items
• Corrosion proof: Polymer (High-Density Polypropylene) and Type 304 stainless steel. • Ships assembled.
Storage Level Frames
• Open four sided frames accommodate drop-in accessories including wire baskets and stainless drying racks. • Includes corrosion proof MetroMax i™ frame and a bag of wedges
Wire Baskets*
• Conveniently hold small items • 9" (229mm) deep • Built in storage handles allow easy removal • Corrosion resistant taupe epoxy finish.
NOTE: MB1822XE and MB2422XE are not adaptable to 24" (610mm) long MetroMax i storage level frames
Stainless Steel Drop-in Racks
• Open wire design to safely dry pots, pans, and containers
• To create a storage level with stainless drop-in order the following:
Qty. 1 Drop-in rack
Qty. 1 4-sided MetroMax i™ frame
Qty. 1 MetroMax i™ center beam
• Can be retrofitted to existing MetroMax iq™ shelves. Simply remove
the mats and drop in the stainless drying rack.
• Center beams: RPMX36-CBEAM, RPMX48-CBEAM,
RPMX60-CBEAM
Cutting Board and Tray Drying Rack System
• Rack is mounted to standard MetroMax i ™ or MetroMax Q shelf. • Promotes safe air drying of cutting boards and trays. • 1 -1 / 8 " (28mm) and 3" (76mm) slide spacing available.
Can Rack
• Front loading, front dispensing can rack holds eight #10 cans or
twelve #5 cans.
• Tough, corrosion resistant taupe epoxy finish.
• Mounts on any MetroMax i™ or MetroMax Q shelf.
Part # CR24EPrice $71.40 each
MetroMax iQ® 3-Sided Frames • 1" (25mm) x 11/2" (38mm) structural steel tubing. Includes tri-lobal
adapters to attach to posts. (Replacement adapters: Model No.
MTLA bag of 4)
• Corrosion resistant taupe epoxy finish.
• Use when configuring work tables or as a 3-sided ledge to contain
bulky items.
Width/Length
in
Part #
Price Each
Qty
18x36
M3TF1836E
64.05
18x48
M3TF1848E
67.55
18x60
M3TF1860E
79.10
24x36
M3TF2436E
67.55
24x48
M3TF2448E
70.70
24x60
M3TF2460E
85.05
Handles
Use handles on mobile units to improve maneuvering and ergonomics.
Handles will fit both MetroMax i™ and MetroMax iQ units. Stainless steel
material will offer long lasting performance.
Easy-Grip Handle
• Ergonomic design.
• Type 304 stainless steel handle and reinforced nylon tri-lobal adapters.
Swing-Up Handle
• Ideal for maneuvering heavier loads.
• Type 304 stainless steel handle and reinforced nylon tri-lobal adapters.
MetroMax iQ® Style Color Shelf Marker
Attach easily to
MetroMax iQ shelf for content identification.
Color Shelf Marker